Edit File - File Manager

Edit File: rpl_binlog_errors.test

# BUG#46166: MYSQL_BIN_LOG::new_file_impl is not propagating error
#            when generating new name.
#  
# WHY
# ===
#
# We want to check whether error is reported or not when
# new_file_impl fails (this may happen when rotation is not
# possible because there is some problem finding an 
# unique filename).
#
# HOW
# ===
# 
# Test cases are documented inline.

-- source include/have_innodb.inc
-- source include/have_debug.inc
-- source include/master-slave.inc

-- echo #######################################################################
-- echo ####################### PART 1: MASTER TESTS ##########################
-- echo #######################################################################

### ACTION: stopping slave as it is not needed for the first part of
###         the test

-- connection slave
-- source include/stop_slave.inc
-- connection master

call mtr.add_suppression("Can't generate a unique log-filename");
call mtr.add_suppression("Writing one row to the row-based binary log failed.*");
call mtr.add_suppression("Error writing file .*");

SET @old_debug= @@global.debug;

### ACTION: create a large file (> 4096 bytes) that will be later used
###         in LOAD DATA INFILE to check binlog errors in its vacinity
-- let $load_file= $MYSQLTEST_VARDIR/tmp/bug_46166.data
-- let $MYSQLD_DATADIR= `select @@datadir`
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SELECT repeat('x',8192) INTO OUTFILE '$load_file'

### ACTION: create a small file (< 4096 bytes) that will be later used
###         in LOAD DATA INFILE to check for absence of binlog errors
###         when file loading this file does not force flushing and
###         rotating the binary log
-- let $load_file2= $MYSQLTEST_VARDIR/tmp/bug_46166-2.data
-- let $MYSQLD_DATADIR= `select @@datadir`
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SELECT repeat('x',10) INTO OUTFILE '$load_file2'

RESET MASTER;

-- echo ###################### TEST #1

### ASSERTION: no problem flushing logs (should show two binlogs)
FLUSH LOGS;
-- echo # assert: must show two binlogs
-- source include/show_binary_logs.inc

-- echo ###################### TEST #2

### ASSERTION: check that FLUSH LOGS actually fails and reports
###            failure back to the user if find_uniq_filename fails
###            (should show just one binlog)

RESET MASTER;
SET GLOBAL debug="+d,error_unique_log_filename";
-- error ER_NO_UNIQUE_LOGFILE
FLUSH LOGS;
-- echo # assert: must show one binlog
-- source include/show_binary_logs.inc

### ACTION: clean up and move to next test
SET GLOBAL debug="";
RESET MASTER;

-- echo ###################### TEST #3

### ACTION: create some tables (t1, t2, t4) and insert some values in
###         table t1
CREATE TABLE t1 (a INT);
CREATE TABLE t2 (a VARCHAR(16384)) Engine=InnoDB;
CREATE TABLE t4 (a VARCHAR(16384));
INSERT INTO t1 VALUES (1);
RESET MASTER;

### ASSERTION: we force rotation of the binary log because it exceeds
###            the max_binlog_size option (should show two binary
###            logs)

-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2

# shows two binary logs
-- echo # assert: must show two binlog
-- source include/show_binary_logs.inc

# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;

-- echo ###################### TEST #4

### ASSERTION: load the big file into a transactional table and check
###            that it reports error. The table will contain the
###            changes performed despite the fact that it reported an
###            error.

SET GLOBAL debug="+d,error_unique_log_filename";
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2

# show table 
-- echo # assert: must show one entry
SELECT count(*) FROM t2;

# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;

-- echo ###################### TEST #5

### ASSERTION: load the small file into a transactional table and
###            check that it succeeds

SET GLOBAL debug="+d,error_unique_log_filename";
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file2' INTO TABLE t2

# show table 
-- echo # assert: must show one entry
SELECT count(*) FROM t2;

# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;

-- echo ###################### TEST #6

### ASSERTION: check that even if one is using a transactional table
###            and explicit transactions (no autocommit) if rotation
###            fails we get the error. Transaction is not rolledback
###            because rotation happens after the commit.

SET GLOBAL debug="+d,error_unique_log_filename";
SET AUTOCOMMIT=0;
INSERT INTO t2 VALUES ('muse');
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
INSERT INTO t2 VALUES ('muse');
-- error ER_NO_UNIQUE_LOGFILE
COMMIT;

### ACTION: Show the contents of the table after the test 
-- echo # assert: must show three entries
SELECT count(*) FROM t2;

### ACTION: clean up and move to the next test 
SET AUTOCOMMIT= 1;
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;

-- echo ###################### TEST #7

### ASSERTION: check that on a non-transactional table, if rotation
###            fails then an error is reported and an incident event
###            is written to the current binary log.

SET GLOBAL debug="+d,error_unique_log_filename";
SELECT count(*) FROM t4;
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4

-- echo # assert: must show 1 entry
SELECT count(*) FROM t4;

-- echo ### check that the incident event is written to the current log
SET GLOBAL debug="-d,error_unique_log_filename";
-- let $binlog_start= query_get_value(SHOW MASTER STATUS, Position, 1)
-- let $binlog_file= query_get_value(SHOW MASTER STATUS, File, 1)

# 53 is the size of the incident event, so we start from 22 bytes before the
# current position
-- let $binlog_start = `SELECT $binlog_start - 53`
FLUSH LOGS;
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR $binlog_start <binlog_start> $binlog_file BINLOG_FILE
-- replace_column 2 # 4 # 5 #
-- eval SHOW BINLOG EVENTS IN '$binlog_file' FROM $binlog_start LIMIT 1

# clean up and move to next test
DELETE FROM t4;
RESET MASTER;

-- echo ###################### TEST #8

### ASSERTION: check that statements end up in error but they succeed
###            on changing the data.

SET GLOBAL debug="+d,error_unique_log_filename";
-- echo # must show 0 entries
SELECT count(*) FROM t4;
SELECT count(*) FROM t2;

-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
-- error ER_NO_UNIQUE_LOGFILE
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc');

-- echo # INFO: Count(*) Before Offending DELETEs
-- echo # assert: must show 1 entry
SELECT count(*) FROM t4;
-- echo # assert: must show 4 entries
SELECT count(*) FROM t2;

-- error ER_NO_UNIQUE_LOGFILE
DELETE FROM t4;
-- error ER_NO_UNIQUE_LOGFILE
DELETE FROM t2;

-- echo # INFO: Count(*) After Offending DELETEs
-- echo # assert: must show zero entries
SELECT count(*) FROM t4;
SELECT count(*) FROM t2;

# remove fault injection
SET GLOBAL debug="-d,error_unique_log_filename";

-- echo ###################### TEST #9

### ASSERTION: check that if we disable binlogging, then statements
###            succeed.
SET GLOBAL debug="+d,error_unique_log_filename";
SET SQL_LOG_BIN=0;
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc'), ('ddd');
INSERT INTO t4 VALUES ('eee'), ('fff'), ('ggg'), ('hhh');
-- echo # assert: must show four entries
SELECT count(*) FROM t2;
SELECT count(*) FROM t4;
DELETE FROM t2;
DELETE FROM t4;
-- echo # assert: must show zero entries
SELECT count(*) FROM t2;
SELECT count(*) FROM t4;
SET SQL_LOG_BIN=1;
SET GLOBAL debug="-d,error_unique_log_filename";

-- echo ###################### TEST #10

### ASSERTION: check that error is reported if there is a failure
###            while registering the index file and the binary log
###            file or failure to write the rotate event.

call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Could not open .*");

RESET MASTER;
SHOW WARNINGS;

# +d,fault_injection_registering_index => injects fault on MYSQL_BIN_LOG::open
SET GLOBAL debug="+d,fault_injection_registering_index";
-- replace_regex /\.[\\\/]master/master/
-- error ER_CANT_OPEN_FILE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_registering_index";

-- error ER_NO_BINARY_LOGGING
SHOW BINARY LOGS;

# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;

-- echo ###################### TEST #11

### ASSERTION: check that error is reported if there is a failure
###            while opening the index file and the binary log file or
###            failure to write the rotate event.

# restart the server so that we have binlog again
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc

# +d,fault_injection_openning_index => injects fault on MYSQL_BIN_LOG::open_index_file
SET GLOBAL debug="+d,fault_injection_openning_index";
-- replace_regex /\.[\\\/]master/master/
-- error ER_CANT_OPEN_FILE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_openning_index";

-- error ER_FLUSH_MASTER_BINLOG_CLOSED
RESET MASTER;

# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;

# restart the server so that we have binlog again
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc

-- echo ###################### TEST #12

### ASSERTION: check that error is reported if there is a failure
###            while writing the rotate event when creating a new log
###            file.

# +d,fault_injection_new_file_rotate_event => injects fault on MYSQL_BIN_LOG::MYSQL_BIN_LOG::new_file_impl
SET GLOBAL debug="+d,fault_injection_new_file_rotate_event";
-- error ER_ERROR_ON_WRITE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_new_file_rotate_event";

-- error ER_FLUSH_MASTER_BINLOG_CLOSED
RESET MASTER;

# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;

# restart the server so that we have binlog again
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc

## clean up
SET GLOBAL debug= @old_debug;
DROP TABLE t1, t2, t4;
RESET MASTER;

# restart slave again
-- connection slave
-- source include/start_slave.inc
-- connection master

-- echo #######################################################################
-- echo ####################### PART 2: SLAVE TESTS ###########################
-- echo #######################################################################

### setup
--source include/rpl_reset.inc
-- connection slave

# slave suppressions

call mtr.add_suppression("Slave I/O: Relay log write failure: could not queue event from master.*");
call mtr.add_suppression("Error writing file .*");
call mtr.add_suppression("Could not open .*");
call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Can't generate a unique log-filename .*");
-- echo ###################### TEST #13

#### ASSERTION: check against unique log filename error
-- let $io_thd_injection_fault_flag= error_unique_log_filename
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc

-- echo ###################### TEST #14

#### ASSERTION: check against rotate failing
-- let $io_thd_injection_fault_flag= fault_injection_new_file_rotate_event
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc

-- echo ###################### TEST #15

#### ASSERTION: check against relay log open failure
-- let $io_thd_injection_fault_flag= fault_injection_registering_index
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc

-- echo ###################### TEST #16

#### ASSERTION: check against relay log index open failure
-- let $io_thd_injection_fault_flag= fault_injection_openning_index
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc

### clean up
-- source include/stop_slave_sql.inc
SET GLOBAL debug=@old_debug;
RESET SLAVE;
RESET MASTER;
--let $rpl_only_running_threads= 1
--source include/rpl_end.inc

Back to File Manager