Edit File - File Manager

Edit File: rpl_semi_sync.result

include/master-slave.inc
[connection master]
#
# Uninstall semi-sync plugins on master and slave
#
include/stop_slave.inc
#
# Main test of semi-sync replication start here
#
[ on master ]
[ default state of semi-sync on master should be OFF ]
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	OFF
[ enable semi-sync on master ]
set global rpl_semi_sync_master_enabled = 1;
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	ON
[ status of semi-sync on master should be ON even without any semi-sync slaves ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	0
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
#
# BUG#45672 Semisync repl: ActiveTranx:insert_tranx_node: transaction node allocation failed
# BUG#45673 Semisynch reports correct operation even if no slave is connected
#
[ status of semi-sync on master should be OFF ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	0
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
#
# INSTALL PLUGIN semi-sync on slave
#
[ on slave ]
[ default state of semi-sync on slave should be OFF ]
show variables like 'rpl_semi_sync_slave_enabled';
Variable_name	Value
rpl_semi_sync_slave_enabled	OFF
[ enable semi-sync on slave ]
set global rpl_semi_sync_slave_enabled = 1;
show variables like 'rpl_semi_sync_slave_enabled';
Variable_name	Value
rpl_semi_sync_slave_enabled	ON
include/start_slave.inc
[ on master ]
[ initial master state after the semi-sync slave connected ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
create table t1(a int) engine = ENGINE_TYPE;
[ master state after CREATE TABLE statement ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	1
select CONNECTIONS_NORMAL_SLAVE - CONNECTIONS_NORMAL_SLAVE as 'Should be 0';
Should be 0
0
[ insert records to table ]
[ master status after inserts ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	11
[ on slave ]
[ slave status after replicated inserts ]
show status like 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	ON
select count(distinct a) from t1;
count(distinct a)
10
select min(a) from t1;
min(a)
1
select max(a) from t1;
max(a)
10

# BUG#50157
# semi-sync replication crashes when replicating a transaction which
# include 'CREATE TEMPORARY TABLE `MyISAM_t` SELECT * FROM `Innodb_t` ;
[ on master ]
SET SESSION AUTOCOMMIT= 0;
CREATE TABLE t2(c1 INT) ENGINE=innodb;
BEGIN;

# Even though it is in a transaction, this statement is binlogged into binlog
# file immediately.
CREATE TEMPORARY TABLE t3 SELECT c1 FROM t2 where 1=1;

# These statements will not be binlogged until the transaction is committed
INSERT INTO t2 VALUES(11);
INSERT INTO t2 VALUES(22);
COMMIT;
DROP TABLE t2, t3;
SET SESSION AUTOCOMMIT= 1;
#
# Test semi-sync master will switch OFF after one transaction
# timeout waiting for slave reply.
#
include/stop_slave.inc
[ on master ]
set global rpl_semi_sync_master_timeout= 5000;
[ master status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	14
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
[ semi-sync replication of these transactions will fail ]
insert into t1 values (500);
[ master status should be OFF ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	1
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	14
insert into t1 values (100);
[ master status should be OFF ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	12
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	14
#
# Test semi-sync status on master will be ON again when slave catches up
#
[ on slave ]
[ slave status should be OFF ]
show status like 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
include/start_slave.inc
[ slave status should be ON ]
show status like 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	ON
select count(distinct a) from t1;
count(distinct a)
2
select min(a) from t1;
min(a)
100
select max(a) from t1;
max(a)
500
[ on master ]
[ master status should be ON again after slave catches up ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	12
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	14
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
#
# Test disable/enable master semi-sync on the fly.
#
drop table t1;
[ on slave ]
include/stop_slave.inc
#
# Flush status
#
[ Semi-sync master status variables before FLUSH STATUS ]
SHOW STATUS LIKE 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	12
SHOW STATUS LIKE 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	15
FLUSH NO_WRITE_TO_BINLOG STATUS;
[ Semi-sync master status variables after FLUSH STATUS ]
SHOW STATUS LIKE 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
SHOW STATUS LIKE 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
[ on master ]
show master logs;
Log_name	master-bin.000001
File_size	#
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	ON
[ disable semi-sync on the fly ]
set global rpl_semi_sync_master_enabled=0;
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	OFF
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
[ enable semi-sync on the fly ]
set global rpl_semi_sync_master_enabled=1;
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	ON
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
#
# Test RESET MASTER/SLAVE
#
[ on slave ]
include/start_slave.inc
[ on master ]
create table t1 (a int) engine = ENGINE_TYPE;
drop table t1;
show status like 'Rpl_relay%';
Variable_name	Value
[ test reset master ]
[ on master]
reset master;
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
[ on slave ]
include/stop_slave.inc
reset slave;
include/start_slave.inc
[ on master ]
create table t1 (a int) engine = ENGINE_TYPE;
insert into t1 values (1);
insert into t1 values (2), (3);
[ on slave ]
select * from t1;
a
1
2
3
[ on master ]
[ master semi-sync status should be ON ]
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	3
#
# Start semi-sync replication without SUPER privilege
#
include/stop_slave.inc
reset slave;
[ on master ]
reset master;
set sql_log_bin=0;
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl';
flush privileges;
set sql_log_bin=1;
[ on slave ]
grant replication slave on *.* to rpl@127.0.0.1 identified by 'rpl';
flush privileges;
change master to master_user='rpl',master_password='rpl';
include/start_slave.inc
show status like 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	ON
[ on master ]
[ master semi-sync should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	0
insert into t1 values (4);
insert into t1 values (5);
[ master semi-sync should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_no_tx';
Variable_name	Value
Rpl_semi_sync_master_no_tx	0
show status like 'Rpl_semi_sync_master_yes_tx';
Variable_name	Value
Rpl_semi_sync_master_yes_tx	2
#
# Test semi-sync slave connect to non-semi-sync master
#
[ on slave ]
include/stop_slave.inc
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
[ on master ]
[ Semi-sync status on master should be ON ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	0
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
set global rpl_semi_sync_master_enabled= 0;
[ on slave ]
SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled';
Variable_name	Value
rpl_semi_sync_slave_enabled	ON
include/start_slave.inc
[ on master ]
insert into t1 values (8);
[ master semi-sync clients should be 1, status should be OFF ]
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
[ on slave ]
show status like 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	ON
include/stop_slave.inc
[ on master ]
set sql_log_bin=0;
include/stop_dump_threads.inc
UNINSTALL PLUGIN rpl_semi_sync_master;
set sql_log_bin=1;
SHOW VARIABLES LIKE 'rpl_semi_sync_master_enabled';
Variable_name	Value
[ on slave ]
SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled';
Variable_name	Value
rpl_semi_sync_slave_enabled	ON
include/start_slave.inc
[ on master ]
insert into t1 values (10);
[ on slave ]
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
#
# Test non-semi-sync slave connect to semi-sync master
#
set sql_log_bin=0;
INSTALL PLUGIN rpl_semi_sync_master SONAME 'SEMISYNC_MASTER_PLUGIN';
set global rpl_semi_sync_master_timeout= 5000;
/* 5s */
set sql_log_bin=1;
set global rpl_semi_sync_master_enabled= 1;
[ on slave ]
include/stop_slave.inc
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
[ uninstall semi-sync slave plugin ]
UNINSTALL PLUGIN rpl_semi_sync_slave;
SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled';
Variable_name	Value
include/start_slave.inc
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
include/stop_slave.inc
[ reinstall semi-sync slave plugin and disable semi-sync ]
INSTALL PLUGIN rpl_semi_sync_slave SONAME 'SEMISYNC_SLAVE_PLUGIN';
set global rpl_semi_sync_slave_enabled= 0;
SHOW VARIABLES LIKE 'rpl_semi_sync_slave_enabled';
Variable_name	Value
rpl_semi_sync_slave_enabled	OFF
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
include/start_slave.inc
SHOW STATUS LIKE 'Rpl_semi_sync_slave_status';
Variable_name	Value
Rpl_semi_sync_slave_status	OFF
#
# Clean up
#
include/uninstall_semisync.inc
include/stop_slave.inc
change master to master_user='root',master_password='';
include/start_slave.inc
drop table t1;
drop user rpl@127.0.0.1;
flush privileges;
include/rpl_end.inc

Back to File Manager