Edit File: partition_check.inc
################################################################################ # inc/partition_check.inc # # # # Purpose: # # Do some basic usability checks on table t1. # # This routine is only useful for the partition_<feature>_<engine> tests. # # # # Some Notes: # # It is intended that in many testcases (statements) more than one partition # # or subpartition is affected. # # Without analysis of the partitioning function used during CREATE TABLE # # we cannot be 100% sure that this goal is reached. # # But statements affecting many rows give a good probability that this # # appears. # # # # It is expected that the table to be checked contains at the beginning # # of this script records following the scheme # # f_int1 f_int2 f_char1 f_char2 f_charbig # # 1 1 '1' '1' '###1###' # # 2 2 '2' '1' '###2###' # # ... ... ... ... ... # # x x 'x' 'x' '###x###' # # x = @max_row # # # # The table content must be equal to the content of the table t0_template. # # Attention: Please be careful when modiying the data. # # Records can be deleted or inserted, but the content of the # # records after a test/testsequence should follow this scheme. # # # # All checks of preceding statements via Select are so written, # # that they deliver a # # # check <n> success: 1 # # when everything is like expected. # # - f_charbig is typically used for showing if something was changed. # # This is useful for cleanups. # # # #------------------------------------------------------------------------------# # Original Author: mleich # # Original Date: 2006-03-05 # # Change Author: mleich # # Change Date: 2007-10-08 # # Change: Around fix for # # Bug#31243 Test "partition_basic_myisam" truncates path names# # Adjustments of expected error codes: # # ER_NO_PARTITION_FOR_GIVEN_VALUE is now 1525 # # ER_SAME_NAME_PARTITION is now 1516 # ################################################################################ --echo # Start usability test (inc/partition_check.inc) # Print the CREATE TABLE STATEMENT and store the current layout of the table --source suite/parts/inc/partition_layout_check1.inc #------------------------------------------------------------------------------- ## 1. Check the prerequisites for the following tests # (sideeffect some SELECT functionality is also tested) # Determine if we have PRIMARY KEYs or UNIQUE INDEXes ## 1.1 Check if the content of the records is like expected # Sideeffect: mass SELECT, all records/partitions/subpartitions have to be # read, because at least f_charbig is not part of any # INDEX/PRIMARY KEY if ($no_debug) { --disable_query_log } let $my_stmt= SELECT COUNT(*) <> 0 INTO @aux FROM t1 WHERE f_int1 <> f_int2 OR f_char1 <> CAST(f_int1 AS CHAR) OR f_char1 <> f_char2 OR f_charbig <> CONCAT('===',f_char1,'===') OR f_int1 IS NULL OR f_int2 IS NULL OR f_char1 IS NULL OR f_char2 IS NULL OR f_charbig IS NULL; eval $my_stmt; let $run= `SELECT @aux`; --enable_query_log if ($run) { --echo # Prerequisites for following tests not fullfilled. --echo # The content of the table t1 is unexpected eval $my_stmt; SELECT @aux; --echo # Sorry, have to abort. exit; } # Give a success message like in the other following tests --echo # check prerequisites-1 success: 1 #------------------------------------------------------------------------------- ## 1.2 Check if the number of records and the maximum and minimum values are # like expected # Sideeffect: Check # - COUNT(*) # - MIN/MAX on all columns possibly used in part. function # The optimizer might decide to run on INDEX only, if available. # ## 1.2.1 Check COUNT(*) if ($no_debug) { --disable_query_log } let $my_stmt= SELECT COUNT(*) <> @max_row INTO @aux FROM t1; let $run= `SELECT @aux`; --enable_query_log if ($run) { --echo # Prerequisites for following tests not fullfilled. --echo # The content of the table t1 is unexpected eval $my_stmt; SELECT @aux; --echo # Sorry, have to abort. exit; } # Give a success message like in the other following tests --echo # check COUNT(*) success: 1 ## 1.2.2 Check MAX(f_int1),MIN(f_int1) if ($no_debug) { --disable_query_log } let $my_stmt= SELECT MIN(f_int1) <> 1 AND MAX(f_int1) <> @max_row INTO @aux FROM t1; let $run= `SELECT @aux`; --enable_query_log if ($run) { --echo # Prerequisites for following tests not fullfilled. --echo # The content of the table t1 is unexpected eval $my_stmt; SELECT @aux; --echo # Sorry, have to abort. exit; } # Give a success message like in the other following tests --echo # check MIN/MAX(f_int1) success: 1 ## 1.2.3 Check MAX(f_int2),MIN(f_int2) if ($no_debug) { --disable_query_log } let $my_stmt= SELECT MIN(f_int2) <> 1 AND MAX(f_int2) <> @max_row INTO @aux FROM t1; let $run= `SELECT @aux`; --enable_query_log if ($run) { --echo # Prerequisites for following tests not fullfilled. --echo # The content of the table t1 is unexpected eval $my_stmt; SELECT @aux; --echo # Sorry, have to abort. exit; } # Give a success message like in the other following tests --echo # check MIN/MAX(f_int2) success: 1 #------------------------------------------------------------------------------- ## 1.3 Check, if f_int1 and/or f_char2 and/or (f_char1,f_char2) is UNIQUE # by testing if any DUPLICATE KEY might appear # Note: INFORMATION_SCHEMA SELECTs could be also used, but testing the # table via INSERT and SELECT is better because is stresses the # partitioning mechanism. # Sideeffect: Attempt to INSERT one record # DUPLICATE KEY will appear if we have UNIQUE columns # ER_DUP_KEY, ER_DUP_ENTRY --disable_abort_on_error INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, CAST(f_int1 AS CHAR), CAST(f_int1 AS CHAR), 'delete me' FROM t0_template WHERE f_int1 IN (2,3); --enable_abort_on_error if ($no_debug) { --disable_query_log } eval SET @my_errno = $mysql_errno; let $run_delete= `SELECT @my_errno = 0`; let $any_unique= `SELECT @my_errno IN ($ER_DUP_KEY,$ER_DUP_ENTRY)`; # DEBUG eval SELECT $run_delete AS run_delete, $any_unique AS any_unique, # @my_errno AS sql_errno; if (`SELECT @my_errno NOT IN (0,$ER_DUP_KEY,$ER_DUP_ENTRY)`) { --echo # The last command got an unexpected error response. --echo # Expected/handled SQL codes are 0,$ER_DUP_KEY,$ER_DUP_ENTRY SELECT '# SQL code we got was: ' AS "", @my_errno AS ""; --echo # Sorry, have to abort. exit; --echo } # Give a success message like in the other following tests --echo # check prerequisites-3 success: 1 --enable_query_log # DEBUG eval SELECT $run_delete AS run_delete, $any_unique AS any_unique; if ($run_delete) { # INSERT was successful -> DELETE this new record DELETE FROM t1 WHERE f_charbig = 'delete me'; --echo # INFO: Neither f_int1 nor f_int2 nor (f_int1,f_int2) is UNIQUE } if ($any_unique) { --echo # INFO: f_int1 AND/OR f_int2 AND/OR (f_int1,f_int2) is UNIQUE ## 1.3.1 Check, if f_int1 is UNIQUE # Sideeffect: Attempt to INSERT one record # DUPLICATE KEY will appear if we have UNIQUE columns # ER_DUP_KEY, ER_DUP_ENTRY --disable_abort_on_error INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, 2 * @max_row + f_int1, CAST((2 * @max_row + f_int1) AS CHAR), CAST((2 * @max_row + f_int1) AS CHAR), 'delete me' FROM t0_template WHERE f_int1 IN (2,3); --enable_abort_on_error if ($no_debug) { --disable_query_log } eval SET @my_errno = $mysql_errno; let $run_delete= `SELECT @my_errno = 0`; let $f_int1_is_unique= `SELECT @my_errno IN ($ER_DUP_KEY,$ER_DUP_ENTRY)`; # DEBUG eval SELECT $run_delete AS run_delete, $f_int1_is_unique AS any_unique, # @my_errno AS sql_errno; if (`SELECT @my_errno NOT IN (0,$ER_DUP_KEY,$ER_DUP_ENTRY)`) { --echo # The last command got an unexpected error response. --echo # Expected/handled SQL codes are 0,$ER_DUP_KEY,$ER_DUP_ENTRY SELECT '# SQL code we got was: ' AS "", @my_errno AS ""; --echo # Sorry, have to abort. exit; --echo } --enable_query_log if ($f_int1_is_unique) { --echo # INFO: f_int1 is UNIQUE } if ($run_delete) { # INSERT was successful -> DELETE this new record DELETE FROM t1 WHERE f_charbig = 'delete me'; } ## 1.3.2 Check, if f_int2 is UNIQUE (get ER_DUP_KEY or ER_DUP_ENTRY --disable_abort_on_error INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT 2 * @max_row + f_int1, f_int1, CAST((2 * @max_row + f_int1) AS CHAR), CAST((2 * @max_row + f_int1) AS CHAR), 'delete me' FROM t0_template WHERE f_int1 IN (2,3); --enable_abort_on_error if ($no_debug) { --disable_query_log } eval SET @my_errno = $mysql_errno; let $run_delete= `SELECT @my_errno = 0`; let $f_int1_is_unique= `SELECT @my_errno IN ($ER_DUP_KEY,$ER_DUP_ENTRY)`; # DEBUG eval SELECT $run_delete AS run_delete, $f_int1_is_unique AS any_unique, # @my_errno AS sql_errno; if (`SELECT @my_errno NOT IN (0,$ER_DUP_KEY,$ER_DUP_ENTRY)`) { --echo # The last command got an unexpected error response. --echo # Expected/handled SQL codes are 0,$ER_DUP_KEY,$ER_DUP_ENTRY SELECT '# SQL code we got was: ' AS "", @my_errno AS ""; --echo # Sorry, have to abort. exit; --echo } if ($f_int2_is_unique) { --echo # INFO: f_int2 is UNIQUE } --enable_query_log if ($run_delete) { # INSERT was successful -> DELETE this new record DELETE FROM t1 WHERE f_charbig = 'delete me'; } } #------------------------------------------------------------------------------- ## 2. Read the table row by row # Note: There were crashes in history when reading a partitioned table # PRIMARY KEY AND/OR UNIQUE INDEXes ## 2.1 Read all existing and some not existing records of table # per f_int1 used in partitioning function let $col_to_check= f_int1; --source suite/parts/inc/partition_check_read.inc ## 2.2 Read all existing and some not existing records of table # per f_int2 used in partitioning function let $col_to_check= f_int2; --source suite/parts/inc/partition_check_read.inc #------------------------------------------------------------------------------- # 3 Some operations with multiple records # 3.1 Select on "full" table if ($no_debug) { --disable_query_log } SELECT '# check multiple-1 success: ' AS "",COUNT(*) = @max_row AS "" FROM t1; --enable_query_log # # 3.2 (mass) DELETE of @max_row_div3 records DELETE FROM t1 WHERE MOD(f_int1,3) = 0; if ($no_debug) { --disable_query_log } SELECT '# check multiple-2 success: ' AS "",COUNT(*) = @max_row - @max_row_div3 AS "" FROM t1; --enable_query_log # # 3.3 (mass) Insert of @max_row_div3 records # (Insert the records deleted in 3.2) INSERT INTO t1 SELECT * FROM t0_template WHERE MOD(f_int1,3) = 0; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check multiple-3 success: ' AS "", (COUNT(*) = @max_row) AND (MIN(f_int1) = 1) AND (MAX(f_int1) = @max_row) AS "" FROM t1; --enable_query_log # DEBUG SELECT COUNT(*),MIN(f_int1),MAX(f_int1) FROM t1; # # 3.4 (mass) Update @max_row_div4 * 2 + 1 records # Bug#18735: Partitions: NDB, UNIQUE INDEX, UPDATE, strange server response UPDATE t1 SET f_int1 = f_int1 + @max_row WHERE f_int1 BETWEEN @max_row_div2 - @max_row_div4 AND @max_row_div2 + @max_row_div4; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check multiple-4 success: ' AS "",(COUNT(*) = @max_row) AND (MIN(f_int1) = 1) AND (MAX(f_int1) = @max_row_div2 + @max_row_div4 + @max_row ) AS "" FROM t1; --enable_query_log # DEBUG SELECT COUNT(*),MIN(f_int1),MAX(f_int1) FROM t1; # # 3.5 (mass) Delete @max_row_div4 * 2 + 1 records # (Delete the records updated in 3.4) DELETE FROM t1 WHERE f_int1 BETWEEN @max_row_div2 - @max_row_div4 + @max_row AND @max_row_div2 + @max_row_div4 + @max_row; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check multiple-5 success: ' AS "", (COUNT(*) = @max_row - @max_row_div4 - @max_row_div4 - 1) AND (MIN(f_int1) = 1) AND (MAX(f_int1) = @max_row) AS "" FROM t1; --enable_query_log # DEBUG SELECT COUNT(*),MIN(f_int1),MAX(f_int1) FROM t1; #------------------------------------------------------------------------------- # Attention: After this section all modification on the table have to be reverted ! # Current content of t1 follows the rule: # <value>,<value>,'<value>','<value>',===<value>=== # <value> contains all INTEGER values # between 1 and @max_row_div2 - @max_row_div4 - 1 # and # between @max_row_div2 + @max_row_div4 + 1 and @max_row # With other words the values between @max_row_div2 - @max_row_div4 # and @max_row_div2 + @max_row_div4 are "missing". #------------------------------------------------------------------------------- # The following is only needed for tests of UNIQUE CONSTRAINTs. if ($any_unique) { # Calculate the number of records, where we will try INSERT ..... or REPLACE SELECT COUNT(*) INTO @try_count FROM t0_template WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row; # # Calculate the number of records, where we will get DUPLICATE KEY # f_int1 is sufficient for calculating this, because 1.1 # checks, that f_int1 = f_int2 is valid for all rows. SELECT COUNT(*) INTO @clash_count FROM t1 INNER JOIN t0_template USING(f_int1) WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row; if ($debug) { SELECT @try_count, @clash_count; } } #------------------------------------------------------------------------------- # 4 Some operations with single records # 4.1 Insert one record with a value for f_int1 which is lower than in all # existing records. SELECT MIN(f_int1) - 1 INTO @cur_value FROM t1; INSERT INTO t1 SET f_int1 = @cur_value , f_int2 = @cur_value, f_char1 = CAST(@cur_value AS CHAR), f_char2 = CAST(@cur_value AS CHAR), f_charbig = '#SINGLE#'; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check single-1 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 = @cur_value AND f_int2 = @cur_value AND f_char1 = CAST(@cur_value AS CHAR) AND f_char2 = CAST(@cur_value AS CHAR) AND f_charbig = '#SINGLE#'; --enable_query_log # # 4.2 Insert one record with a value for f_int1 which is higher than in all # existing records. SELECT MAX(f_int1) + 1 INTO @cur_value FROM t1; INSERT INTO t1 SET f_int1 = @cur_value , f_int2 = @cur_value, f_char1 = CAST(@cur_value AS CHAR), f_char2 = CAST(@cur_value AS CHAR), f_charbig = '#SINGLE#'; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check single-2 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 = @cur_value AND f_int2 = @cur_value AND f_char1 = CAST(@cur_value AS CHAR) AND f_char2 = CAST(@cur_value AS CHAR) AND f_charbig = '#SINGLE#'; --enable_query_log # # 4.3 Update one record. The value of f_int1 is altered from the lowest to # the highest value of all existing records. # If f_int1 is used for the partitioning expression a movement of the # record to another partition/subpartition might appear. SELECT MIN(f_int1) INTO @cur_value1 FROM t1; SELECT MAX(f_int1) + 1 INTO @cur_value2 FROM t1; # Bug#18735: Partitions: NDB, UNIQUE INDEX, UPDATE, strange server response UPDATE t1 SET f_int1 = @cur_value2 WHERE f_int1 = @cur_value1 AND f_charbig = '#SINGLE#'; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check single-3 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 = @cur_value2 AND f_charbig = '#SINGLE#'; --enable_query_log # # 4.4 Update one record. The value of f_int1 is altered from the highest value # to a value lower than in all existing records. # If f_int1 is used for the partitioning expression a movement of the # record to another partition/subpartition might appear. # f_int1 gets the delicate value '-1'. SET @cur_value1= -1; SELECT MAX(f_int1) INTO @cur_value2 FROM t1; # Bug#15968: Partitions: crash when INSERT with f_int1 = -1 into PARTITION BY HASH(f_int1) # Bug#16385: Partitions: crash when updating a range partitioned NDB table # Bug#18735: Partitions: NDB, UNIQUE INDEX, UPDATE, strange server response UPDATE t1 SET f_int1 = @cur_value1 WHERE f_int1 = @cur_value2 AND f_charbig = '#SINGLE#'; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check single-4 success: ' AS "",COUNT(*) AS "" FROM t1 WHERE f_int1 = @cur_value1 AND f_charbig = '#SINGLE#'; --enable_query_log # # 4.5 Delete the record with the highest value of f_int1. SELECT MAX(f_int1) INTO @cur_value FROM t1; DELETE FROM t1 WHERE f_int1 = @cur_value AND f_charbig = '#SINGLE#'; # Check of preceding statements via Select if ($no_debug) { --disable_query_log } SELECT '# check single-5 success: ' AS "",COUNT(*) = 0 AS "" FROM t1 WHERE f_charbig = '#SINGLE#' AND f_int1 = f_int1 = @cur_value; --enable_query_log # # 4.6 Delete the record with f_int1 = -1 DELETE FROM t1 WHERE f_int1 = -1 AND f_charbig = '#SINGLE#'; # Check of preceding statements via Select if ($no_debug) { --disable_query_log } SELECT '# check single-6 success: ' AS "",COUNT(*) = 0 AS "" FROM t1 WHERE f_charbig = '#SINGLE#' AND f_int1 IN (-1,@cur_value); --enable_query_log # # 4.7 Insert one record with such a big value for f_int1, so that in case # - f_int1 is used within the partitioning algorithm # - we use range partitioning # we get error ER_NO_PARTITION_FOR_GIVEN_VALUE # "Table has no partition for value ...." # or ER_SAME_NAME_PARTITION --disable_abort_on_error eval INSERT INTO t1 SET f_int1 = @max_int_4 , f_int2 = @max_int_4, f_charbig = '#$max_int_4##'; --enable_abort_on_error if ($no_debug) { --disable_query_log } eval SET @my_errno = $mysql_errno; if (`SELECT @my_errno NOT IN (0,$ER_SAME_NAME_PARTITION,$ER_NO_PARTITION_FOR_GIVEN_VALUE)`) { --echo # The last command got an unexpected error response. --echo # Expected/handled SQL codes are 0,$ER_SAME_NAME_PARTITION,$ER_NO_PARTITION_FOR_GIVEN_VALUE SELECT '# SQL code we got was: ' AS "", @my_errno AS ""; --echo # Sorry, have to abort. exit; --echo } # Check of preceding statement via Select, if the INSERT was successful let $run= `SELECT @my_errno = 0`; if ($run) { # Attention: There are some tests where the column type is changed from # INTEGER to MEDIUMINT. MEDIUMINT has a smaller range and the # inserted value is automatically adjusted to the maximum value # of the data type. # that's the reason why we cannot use WHERE <column> = @max_int_4 here. # eval SELECT '# check single-7 success: ' AS "", COUNT(*) = 1 AS "" FROM t1 WHERE f_charbig = '#$max_int_4##'; # Revert this modification --enable_query_log eval DELETE FROM t1 WHERE f_charbig = '#$max_int_4##'; } --enable_query_log #------------------------------------------------------------------------------- # 5 Experiments with NULL # If the result of the partitioning function IS NULL partitioning treats # this record as if the the result of the partitioning function is # MySQL 5.1 < March 2006 : zero # MySQL 5.1 >= March 2006 : LONGLONG_MIN # Let's INSERT a record where the result of the partitioning function is # probably (depends on function currently used) zero and look if there are # any strange effects during the execution of the next statements. # Bug#17891: Partitions: NDB, crash on select .. where col is null or col = value # Bug#18659: Partitions: wrong result on WHERE <col. used in part. function> IS NULL DELETE FROM t1 WHERE f_int1 IS NULL OR f_int1 = 0; # Attention: Zero should be tested INSERT t1 SET f_int1 = 0 , f_int2 = 0, f_char1 = CAST(0 AS CHAR), f_char2 = CAST(0 AS CHAR), f_charbig = '#NULL#'; # 5.1 Insert one record with f_int1 IS NULL. # f1 "=" NULL is a delicate value which might stress the partitioning # mechanism if the result of the expression in the partitioning algorithm # becomes NULL. # This INSERT will fail, if f_int1 is PRIMARY KEY or UNIQUE INDEX # with ER_BAD_NULL_ERROR. --disable_abort_on_error INSERT INTO t1 SET f_int1 = NULL , f_int2 = -@max_row, f_char1 = CAST(-@max_row AS CHAR), f_char2 = CAST(-@max_row AS CHAR), f_charbig = '#NULL#'; # Some other NULL experiments if preceding INSERT was successfull --enable_abort_on_error if ($no_debug) { --disable_query_log } eval SET @my_errno = $mysql_errno; let $run= `SELECT @my_errno = 0`; if (`SELECT @my_errno NOT IN (0,$ER_BAD_NULL_ERROR)`) { --echo # The last command got an unexpected error response. --echo # Expected/handled SQL codes are 0,$ER_BAD_NULL_ERROR SELECT '# SQL code we got was: ' AS "", @my_errno AS ""; --echo # Sorry, have to abort. --echo # Please check the error name to number mapping in inc/partition.pre. exit; --echo } --enable_query_log # Give a success message like in the other following tests --echo # check null success: 1 # The following checks do not make sense if f_int1 cannot be NULL if ($run) { # Check of preceding statement via Select if ($no_debug) { --disable_query_log } # Bug#17432: Partitions: wrong result, SELECT ... where <column> is null SELECT '# check null-1 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 IS NULL AND f_charbig = '#NULL#'; --enable_query_log # # 5.2 Update of f_int1 from NULL to negative value # Bug#17432: Partitions: wrong result, SELECT ... where <column> is null UPDATE t1 SET f_int1 = -@max_row WHERE f_int1 IS NULL AND f_int2 = -@max_row AND f_char1 = CAST(-@max_row AS CHAR) AND f_char2 = CAST(-@max_row AS CHAR) AND f_charbig = '#NULL#'; if ($no_debug) { --disable_query_log } # Check of preceding statement via Select SELECT '# check null-2 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 = -@max_row AND f_charbig = '#NULL#'; --enable_query_log # 5.3 Update of f_int1 from negative value to NULL UPDATE t1 SET f_int1 = NULL WHERE f_int1 = -@max_row AND f_int2 = -@max_row AND f_char1 = CAST(-@max_row AS CHAR) AND f_char2 = CAST(-@max_row AS CHAR) AND f_charbig = '#NULL#'; if ($no_debug) { --disable_query_log } # Check of preceding statement via Select SELECT '# check null-3 success: ' AS "",COUNT(*) = 1 AS "" FROM t1 WHERE f_int1 IS NULL AND f_charbig = '#NULL#'; --enable_query_log # 5.4 DELETE of the record with f_int1 IS NULL DELETE FROM t1 WHERE f_int1 IS NULL AND f_int2 = -@max_row AND f_char1 = CAST(-@max_row AS CHAR) AND f_char2 = CAST(-@max_row AS CHAR) AND f_charbig = '#NULL#'; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check null-4 success: ' AS "",COUNT(*) = 0 AS "" FROM t1 WHERE f_int1 IS NULL; --enable_query_log } # Remove the "0" record DELETE FROM t1 WHERE f_int1 = 0 AND f_int2 = 0 AND f_char1 = CAST(0 AS CHAR) AND f_char2 = CAST(0 AS CHAR) AND f_charbig = '#NULL#'; #------------------------------------------------------------------------------- ## 6. UPDATEs of columns used in the partitioning function and the PRIMARY KEY # the UNIQUE INDEX without using straight forward UPDATE. # INSERT .... ON DUPLICATE KEY UPDATE .... --> update existing record # REPLACE --> delete existing record + insert new record # Note: # - This test is skipped for tables without any PRIMARY KEY or # UNIQUE INDEX. # - MOD(<column>,n) with n = prime number, n <> 2 is used to cause # that many records and most probably more than one PARTITION/ # SUBPARTITION are affected. # - Under certain circumstanditions a movement of one or more records # to other PARTITIONs/SUBPARTITIONs might appear. # - There are some storage engines, which are unable to revert changes # of a failing statement. This has to be taken into account when # checking if a DUPLICATE KEY might occur. # # What to test ? # UNIQUE columns # f_int1 IU f_int1 IU f_int1,f_int2 R # f_int2 IU f_int2 IU f_int1,f_int2 R # f_int1,f_int2 IU f_int1,f_int2 R # # IU column = INSERT .. ON DUPLICATE KEY UPDATE column # R = REPLACE .. # # Current state of the data # 1. f_int1 = f_int2, f_char1 = CAST(f_int1 AS CHAR), f_char2 = f_char1, # f_charbig = CONCAT('===',f_char1,'===); # 2. f_int1 FROM 1 TO @max_row_div4 # AND @max_row_div2 + @max_row_div4 TO @max_row # # Do not apply the following tests to tables without UNIQUE columns. if ($any_unique) { let $num= 1; if ($f_int1_is_unique) { ## 6.1 f_int1 is UNIQUE, UPDATE f_int1 when DUPLICATE KEY # Bug#15236 Partitions: crash, if Insert .. on duplicate key causes update of existing row INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, '', '', 'was inserted' FROM t0_template source_tab WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row ON DUPLICATE KEY UPDATE f_int1 = 2 * @max_row + source_tab.f_int1, f_charbig = 'was updated'; --source suite/parts/inc/partition_20.inc } if ($f_int2_is_unique) { ## 6.2 f_int2 is UNIQUE, UPDATE f_int2 when DUPLICATE KEY # Bug#15236 Partitions: crash, if Insert .. on duplicate key causes update of existing row INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, '', '', 'was inserted' FROM t0_template source_tab WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row ON DUPLICATE KEY UPDATE f_int2 = 2 * @max_row + source_tab.f_int1, f_charbig = 'was updated'; --source suite/parts/inc/partition_20.inc } ## 6.3 f_int1, f_int2 is UNIQUE, UPDATE f_int1, f_int2 when DUPLICATE KEY INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, '', '', 'was inserted' FROM t0_template source_tab WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row ON DUPLICATE KEY UPDATE f_int1 = 2 * @max_row + source_tab.f_int1, f_int2 = 2 * @max_row + source_tab.f_int1, f_charbig = 'was updated'; --source suite/parts/inc/partition_20.inc ## 6.4 REPLACE # Bug#16782: Partitions: crash, REPLACE .. on table with PK, DUPLICATE KEY REPLACE INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, - f_int1, '', '', 'was inserted or replaced' FROM t0_template source_tab WHERE MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 AND @max_row; # DEBUG SELECT * FROM t1 ORDER BY f_int1, f_int2; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check replace success: ' AS "", COUNT(*) = @try_count AS "" FROM t1 WHERE f_charbig = 'was inserted or replaced'; --enable_query_log # Revert the modification DELETE FROM t1 WHERE f_int1 BETWEEN @max_row_div2 AND @max_row_div2 + @max_row_div4; # If there is only UNIQUE (f1,f2) we will have pairs f_int1,f_int2 # <n>, <n> and <n>, <-n> # where MOD(f_int1,3) = 0 # and f_int1 between @max_row_div2 + @max_row_div4 and @max_row. # Delete the <n>, <n> records. DELETE FROM t1 WHERE f_int1 = f_int2 AND MOD(f_int1,3) = 0 AND f_int1 BETWEEN @max_row_div2 + @max_row_div4 AND @max_row; UPDATE t1 SET f_int2 = f_int1, f_char1 = CAST(f_int1 AS CHAR), f_char2 = CAST(f_int1 AS CHAR), f_charbig = CONCAT('===',CAST(f_int1 AS CHAR),'===') WHERE f_charbig = 'was inserted or replaced' AND f_int1 = - f_int2; # DEBUG SELECT * FROM t1 ORDER BY f_int1, f_int2; } #------------------------------------------------------------------------------- # 7 Transactions SET AUTOCOMMIT= 0; # DEBUG SELECT @max_row_div4 , @max_row_div2 + @max_row_div4; if ($no_debug) { --disable_query_log } SELECT COUNT(f_int1) INTO @start_count FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log let $run= `SELECT @start_count <> 0`; if ($run) { --echo # Prerequisites for following tests not fullfilled. --echo # The content of the table t1 is unexpected --echo # There must be no rows BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; SELECT COUNT(f_int1) FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --echo # Sorry, have to abort. exit; } # Number of records to be inserted if ($no_debug) { --disable_query_log } SELECT @max_row_div2 + @max_row_div4 - @max_row_div4 + 1 INTO @exp_inserted_rows; --enable_query_log # 7.1 Successful INSERT + COMMIT INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, '', '', 'was inserted' FROM t0_template source_tab WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; # The inserted records must be visible (at least for our current session) if ($no_debug) { --disable_query_log } SELECT '# check transactions-1 success: ' AS "", COUNT(*) = @exp_inserted_rows AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log # Make the changes persistent for all storage engines COMMIT WORK; # The inserted records must be visible (for all open and future sessions) if ($no_debug) { --disable_query_log } SELECT '# check transactions-2 success: ' AS "", COUNT(*) = @exp_inserted_rows AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log # Let's assume we have a transactional engine + COMMIT is ill. # A correct working ROLLBACK might revert the INSERT. ROLLBACK WORK; if ($no_debug) { --disable_query_log } SELECT '# check transactions-3 success: ' AS "", COUNT(*) = @exp_inserted_rows AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log # Revert the changes DELETE FROM t1 WHERE f_charbig = 'was inserted'; COMMIT WORK; ROLLBACK WORK; if ($no_debug) { --disable_query_log } SELECT '# check transactions-4 success: ' AS "", COUNT(*) = 0 AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log # # 7.2 Successful INSERT + ROLLBACK INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, '', '', 'was inserted' FROM t0_template source_tab WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; if ($no_debug) { --disable_query_log } SELECT '# check transactions-5 success: ' AS "", COUNT(*) = @exp_inserted_rows AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log ROLLBACK WORK; if ($no_debug) { --disable_query_log } SELECT COUNT(*) INTO @my_count FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; SELECT '# check transactions-6 success: ' AS "", @my_count IN (0,@exp_inserted_rows) AS ""; let $run= `SELECT @my_count = 0`; if ($run) { --echo # INFO: Storage engine used for t1 seems to be transactional. } let $run= `SELECT @my_count = @exp_inserted_rows`; if ($run) { --echo # INFO: Storage engine used for t1 seems to be not transactional. } --enable_query_log # Let's assume we have a transactional engine + ROLLBACK is ill. # A correct working COMMIT might make the inserted records again visible. COMMIT; if ($no_debug) { --disable_query_log } SELECT '# check transactions-7 success: ' AS "", COUNT(*) IN (0,@exp_inserted_rows) AS "" FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_query_log # Revert the changes DELETE FROM t1 WHERE f_charbig = 'was inserted'; COMMIT WORK; # # 7.3 Failing INSERT (in mid of statement processing) + COMMIT SET @@session.sql_mode = 'traditional'; # Number of records where a INSERT has to be tried SELECT @max_row_div2 + @max_row_div4 - @max_row_div4 + 1 INTO @exp_inserted_rows; # --disable_abort_on_error INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT IF(f_int1 = @max_row_div2,f_int1 / 0,f_int1),f_int1, '', '', 'was inserted' FROM t0_template WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; --enable_abort_on_error COMMIT; # How many new records should be now visible ? # 1. storage engine unable to revert changes made by the failing statement # @max_row_div2 - 1 - @max_row_div4 + 1 # 2. storage engine able to revert changes made by the failing statement # 0 if ($no_debug) { --disable_query_log } SELECT COUNT(*) INTO @my_count FROM t1 WHERE f_int1 BETWEEN @max_row_div4 AND @max_row_div2 + @max_row_div4; SELECT '# check transactions-8 success: ' AS "", @my_count IN (@max_row_div2 - 1 - @max_row_div4 + 1,0) AS ""; let $run= `SELECT @my_count = @max_row_div2 - 1 - @max_row_div4 + 1`; if ($run) { --echo # INFO: Storage engine used for t1 seems to be unable to revert --echo # changes made by the failing statement. } let $run= `SELECT @my_count = 0`; if ($run) { --echo # INFO: Storage engine used for t1 seems to be able to revert --echo # changes made by the failing statement. } --enable_query_log SET @@session.sql_mode = ''; SET AUTOCOMMIT= 1; # Revert the changes DELETE FROM t1 WHERE f_charbig = 'was inserted'; COMMIT WORK; if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } #------------------------------------------------------------------------------- # 8 Some special cases # 8.1 Dramatic increase of the record/partition/subpartition/table sizes UPDATE t1 SET f_charbig = REPEAT('b', 1000); # partial check of preceding statement via Select if ($no_debug) { --disable_query_log } eval SELECT '# check special-1 success: ' AS "",1 AS "" FROM t1 WHERE f_int1 = 1 AND f_charbig = REPEAT('b', 1000); --enable_query_log # # 8.2 Dramatic decrease of the record/partition/subpartition/table sizes UPDATE t1 SET f_charbig = ''; # partial check of preceding statement via Select if ($no_debug) { --disable_query_log } eval SELECT '# check special-2 success: ' AS "",1 AS "" FROM t1 WHERE f_int1 = 1 AND f_charbig = ''; --enable_query_log # Revert the changes UPDATE t1 SET f_charbig = CONCAT('===',CAST(f_int1 AS CHAR),'==='); if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } #------------------------------------------------------------------------------- # 9 TRIGGERs let $num= 1; # 9.1 BEFORE/AFTER INSERT/UPDATE/DELETE TRIGGER on table t0_aux causes that # column values used in partitioning function of t1 are changed. let $tab_has_trigg= t0_aux; let $tab_in_trigg= t1; # Insert three records, which will be updated by the trigger # Bug#18735: Partitions: NDB, UNIQUE INDEX, UPDATE, strange server response eval INSERT INTO $tab_in_trigg(f_int1,f_int2,f_char1,f_char2,f_charbig) SELECT f_int1,f_int2,f_char1,f_char2,'just inserted' FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; let $statement= INSERT INTO t0_aux(f_int1,f_int2,f_char1,f_char2,f_charbig) SELECT f_int1,f_int2,f_char1,f_char2,NULL FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; let $event= BEFORE INSERT; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER INSERT; --source suite/parts/inc/partition_trigg1.inc let $statement= UPDATE t0_aux SET f_int1 = - f_int1, f_int2 = - f_int2 WHERE f_int1 IN (- (@max_row_div2 - 1),- @max_row_div2,- (@max_row_div2 + 1)); let $event= BEFORE UPDATE; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER UPDATE; --source suite/parts/inc/partition_trigg1.inc let $statement= DELETE FROM t0_aux WHERE f_int1 IN (- (@max_row_div2 - 1),- @max_row_div2,- (@max_row_div2 + 1)); let $event= BEFORE DELETE; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER DELETE; --source suite/parts/inc/partition_trigg1.inc # Cleanup eval DELETE FROM $tab_in_trigg WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; # Two currently (February 2006) impossible operations. # 1442: 'Can't update table 't1' in stored function/trigger because it is # already used by statement which invoked this stored function/trigger.' # 1362: 'Updating of OLD row is not allowed in trigger' if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } if ($more_trigger_tests) { # 9.2 BEFORE/AFTER INSERT/UPDATE/DELETE TRIGGER on partitioned table t1 causes # that column values in not partitioned table t0_aux are changed. let $tab_has_trigg= t1; let $tab_in_trigg= t0_aux; # Insert three records, which will be updated by the trigger eval INSERT INTO $tab_in_trigg(f_int1,f_int2,f_char1,f_char2,f_charbig) SELECT f_int1,f_int2,f_char1,f_char2,'just inserted' FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; let $statement= INSERT INTO t1(f_int1,f_int2,f_char1,f_char2,f_charbig) SELECT f_int1,f_int2,f_char1,f_char2,NULL FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; let $event= BEFORE INSERT; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER INSERT; --source suite/parts/inc/partition_trigg1.inc let $statement= UPDATE t1 SET f_int1 = - f_int1, f_int2 = - f_int2 WHERE f_int1 IN (- (@max_row_div2 - 1),- @max_row_div2,- (@max_row_div2 + 1)); let $event= BEFORE UPDATE; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER UPDATE; --source suite/parts/inc/partition_trigg1.inc let $statement= DELETE FROM t1 WHERE f_int1 IN (- (@max_row_div2 - 1),- @max_row_div2,- (@max_row_div2 + 1)); let $event= BEFORE DELETE; --source suite/parts/inc/partition_trigg1.inc let $event= AFTER DELETE; --source suite/parts/inc/partition_trigg1.inc eval DELETE FROM $tab_in_trigg WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1; } if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } # 9.3 BEFORE/AFTER UPDATE TRIGGER on partitioned table causes that the value # of columns in partitioning function is recalculated if ($more_trigger_tests) { # 9.3.1 The UPDATE itself changes a column which is not used in the partitioning # function. # "old" values are used as source within the trigger. let $statement= UPDATE t1 SET f_charbig = '####updated per update statement itself####'; let $source= old; let $event= BEFORE UPDATE; --source suite/parts/inc/partition_trigg2.inc # FIXME when AFTER TRIGGER can be used # Currently (2006-02-23) a AFTER TRIGGER is not allowed to modify a row, which # was just modified: 1362: Updating of NEW row is not allowed in after trigger } # 9.3.2 The UPDATE itself changes a column which is used in the partitioning # function. let $statement= UPDATE t1 SET f_int1 = f_int1 + @max_row, f_int2 = f_int2 - @max_row, f_charbig = '####updated per update statement itself####'; # 9.3.2.1 "old" values are used as source within the trigger. let $source= old; let $event= BEFORE UPDATE; --source suite/parts/inc/partition_trigg2.inc # FIXME when AFTER TRIGGER can be used # Currently (2006-02-23) a AFTER TRIGGER is not allowed to modify a row, which # was just modified: 1362: Updating of NEW row is not allowed in after trigger # 9.3.2.2 "new" values are used as source within the trigger. let $source= new; let $event= BEFORE UPDATE; --source suite/parts/inc/partition_trigg2.inc # FIXME when AFTER TRIGGER can be used if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } # 9.4 BEFORE/AFTER INSERT TRIGGER on partitioned table causes that the value of # columns in partitioning function is recalculated. # 9.4.1 INSERT assigns values to the recalculate columns let $statement= INSERT INTO t1 (f_int1, f_int2, f_char1, f_char2, f_charbig) SELECT f_int1, f_int1, CAST(f_int1 AS CHAR), CAST(f_int1 AS CHAR), 'just inserted' FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1 ORDER BY f_int1; let $event= BEFORE INSERT; let $source= new; --source suite/parts/inc/partition_trigg3.inc # FIXME when AFTER TRIGGER can be used # 9.4.2 INSERT assigns no values to the recalculate columns let $statement= INSERT INTO t1 (f_char1, f_char2, f_charbig) SELECT CAST(f_int1 AS CHAR), CAST(f_int1 AS CHAR), 'just inserted' FROM t0_template WHERE f_int1 BETWEEN @max_row_div2 - 1 AND @max_row_div2 + 1 ORDER BY f_int1; let $event= BEFORE INSERT; let $source= new; --source suite/parts/inc/partition_trigg3.inc # FIXME when AFTER TRIGGER can be used if ($debug) { SELECT * FROM t1 ORDER BY f_int1; } #------------------------------------------------------------------------------- # 10 ANALYZE/CHECK/CHECKSUM ANALYZE TABLE t1; CHECK TABLE t1 EXTENDED; # Checksum depends on @max_row so we have to unify the value --replace_column 2 <some_value> CHECKSUM TABLE t1 EXTENDED; #------------------------------------------------------------------------------- # 11 Some special statements, which may lead to a rebuild of the trees # depending on the storage engine and some particular conditions # 11.1 OPTIMIZE TABLE # Manual about OPTIMIZE <InnoDB table>: # ... , it is mapped to ALTER TABLE, which rebuilds the table. # Rebuilding updates index statistics and frees unused space in the # clustered index. # FIXME What will happen with NDB ? OPTIMIZE TABLE t1; --source suite/parts/inc/partition_layout_check2.inc # 10.2 REPAIR TABLE REPAIR TABLE t1 EXTENDED; --source suite/parts/inc/partition_layout_check2.inc # # 11.3 Truncate # Manual about TRUNCATE on tables ( != InnoDB table with FOREIGN KEY ): # Truncate operations drop and re-create the table .... TRUNCATE t1; # Check of preceding statement via Select if ($no_debug) { --disable_query_log } SELECT '# check TRUNCATE success: ' AS "",COUNT(*) = 0 AS "" FROM t1; --enable_query_log --source suite/parts/inc/partition_layout_check2.inc --echo # End usability test (inc/partition_check.inc)
Back to File Manager